Added: Huawei phones flashing/repair By testpoint Ascend Y550 Y550-L01 Ascend Y635 Y635-CL00 Y635-L01 Y635-L02 Y635-L21 Y635-TL00 Mate 2 MT2-C00 MT2-L02 MT2-L03 Net 10 H871G Latest Huawei phones can be flashed/repaired WITHOUT testpoint. If QDloader 9008 port visible, can be flashed/repaired without testpoint. Please check feature table and tutorials before attempt repair
Hisilicon phones flashing by testpoint. Huawei Honor 7 flash/repair with factory repair file by testpoint Huawei G6 factory repair
Safe repair method with factory firmware - without erase NV, IMEI. Huawei 2K platform flashing support for. Huawei G9 Plus MLA-TL00 MLA-TL10 MLA-UL00 Huawei Maimang 5 MLA-AL00 MLA-AL10 MLA-CL00 Huawei Mate 9 MHA-AL10A MHA-AL10B MHA-AL10C MHA-L09B MHA-L29B MHA-L2AB MHA-TL00A Huawei Mate 9 LON-AL00A LON-AL00B LON-AL00C LON-AL00D LON-CL00B LON-L09A LON-L09B LON-L29A LON-L29B LON-L29C LON-L29D LON-TL10B Huawei Nova CAN-AL00 CAN-AL10 CAN-L1 CAN-L2 CAN-L3 CAN-L11 CAN-L12 CAN-L13 CAN-TL10 CAN-[B]TL20 CAZ-AL00 Huawei Nova Plus MLA-L1 MLA-L2 MLA-L3 MLA-L11 MLA-L12 MLA-L13
Huawei Hisilicon NV partition backup writing. NV partition writing may be required if phone erased or empty board. NV backups uploaded to support.
NV backup writing for: P8 lite ALE-L21,ALE-L23 Honor 6X BLN-AL10 Honor 5A CAM-L21 Honor 4X Che2-L11,Che2-UL00 Honor 4C CHM-U01 Mate S CRR-UL00 P9 EVA-AL10,EVA-TL00 Honor 8 FRD-AL00,FRD-AL10 P8 GRA-UL00 Honor V8 KNT-AL10,KNT-AL20,KNT-UL10 Honor 5C NEM-AL10 Mate 8 NXT-AL10 Honor 6Plus PE-TL10 Honor 7 PLK-UL00 P9 plus VIE-AL10 P9 lite VNS-L31
Flashing support for: Huawei Mate 10 ALP-AL00 ALP-L09 ALP-L29 ALP-TL00 Huawei Mate 10 Pro BLA-A09 BLA-AL00 BLA-L09 BLA-L29 BLA-TL00
Can write firmware by fastboot with locked bootloader and locked FRP (latest phones firmwares may not supported) Huawei Firmware UPDATE.APP file direct writing in fastboot (NOT OTA files) Full erase and write full factory images in fastboot (DC Unlocker factory images in format DGTKS) rom writing in fastboot without signature and compatibility checking! Flash bricked Huawei phones in qualcomm 9008 mode (drivers) Flash bricked Huawei phones in Huawei 1.0 mode (drivers1, drivers2) Flash bricked phones where no Huawei 1.0 or 9008 visible by testpoint Warning MUST READ 1. DC-phoenix can be used with HCU timed license account (unlimited access to DC-Phoenix software for 72h for 1 device) Account creation HERE. HCU tool link and what it is read HERE 2. DC-Phoenix will attempt to remove firmware validation in which case phone may not check firmware and accept incorrect one, be aware! 3. Phone must be charged up before any kind of flashing otherwise it might go dead. 4. Remove SD card from the phone if it is inside. How to repair bricked Huawei phone Repair only not working mobiles! If you want to downgrade security click here Method 1: Can be used when phone in bootloop, stuck in fastboot etc. Can be used for region change. Detailed guide for region change here You should start repair attempt from this method including mobiles with Kirin980, Kirin710, Kirin810 WARNING: DO NOT USE BOARD SOFTWARE FROM OUR SUPPORT AREA FOR METHOD 1 Step 1 In Standard mode Select firmware (use same customization version as one in mobile if you know which one it is) + customization (optional) + preloader (if exists), must start flashing in fastboot mode while "Rescue recovery" option on software is selected! If mobile has Kirin659 or Kirin960 cpu then put a check mark on "Old slow algo" too. If during flashing mobile does not enter into upgrade mode (you get message) do it manually. Turn off phone, hold both vol buttons and connect device to cable, keep holding buttons until you see Huawei logo and then attempt to write same file. IMPORTANT: Do not attempt to write APP files in fastboot without Rescue Recovery option! This will cause additional problems! If this method did not help, read Method 2 Method 2: Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990 Step 1 Rewrite OEMINFO with model, vendor and country matching your full stock rom file data that you want to flash into your device. For mobiles with new version possible only via testpoint. Step 2 After rewriting OEMINFO you will be able to write any region's full stock firmware file in UPDATE mode once (Can do it with DC-Phoenix or from SD card). Select "Standard" in DC-Phoenix . IMPORTANT: if you want to write another file, you will need to repeat step 1. Step 3 (required if no imei, sn, mac or other data missing) HCU repair as empty board guide HERE Method 3 Full repair phone as empty board: Not suitable for Kirin710, Kirin810 , Kirin980, Kirin990 and with part of latest kirin970