How Boot Phone in EDL Mode with TESTPOINT By ASAN

أحمد حزوري - أبو جبريل

Administrator
طاقم الإدارة
إنضم
29-08-2019
How Boot Phone in EDL Mode with TESTPOINT By ASAN

كود:
How Boot Phone in EDL Mode with TESTPOINT

Turn off Phone if its on
Disassemble Phone (Not need to Full Disassemlbe in most case)
Find your Phone TESTPOINT you can Download some Xiaomi Phones TESTPOINT from Here Archive Password: asansam
Connect TESTPOINTS with Piece of wire or metal tweezer then Connect USB Cable to Phone.
if Your TESTPOINT connection was correct now Your Windows Must Detect your Phone in EDL Mode:
Disconnect TESTPOINT Connection (IT'S IMPORTANT)
If You dont install EDL Driver before it must detect your phone as QHSUSB_BULK
in this case Install Driver You Can Found it in 'C:\AHT2\Driver\QDLoader' the install exe file in this folder
If You Installed EDL Driver Before it must Detect as Qualcomm HS-USB QDLoader 9008 (COMX) [X= COM Number]
Select Qualcomm HS-USB QDLoader 9008 (COMX) Port in Select Port Section in Main Window tool
 
التعديل الأخير:
أعلى أسفل